Pilothouse/ Cruiser Boat Covers

1. Measure Boat Length
Measure in a straight line the centreline distance of your boat from Bow to Stern.

2. Measure Beam Width
Measure in a straight line the distance across the beam (widest point of your boat)

3. Measure Height (from gunwale)
Measure a straight line from the gunwale to the highest point on your boat including boat fittings e.g. cabins, windscreens, etc.

NOTE:  It is recommended that both measurement instructions are used to help you choose the correct cover size.

OVERALL FABRIC MEASUREMENTS

1. Measure the Overall Fabric Length
Using a tape measure, take the following measurements on your boat making sure you measure from 20-30cm below the point of the bow of the boat (assume this is where the hem of the cover will be) all the way back to 20-30cm below the stern, ensuring the tape measure goes over the highest parts of the boat, ie, windscreen, Bimini, roof, rocket launchers, stern bait board (whichever of these is applicable).

2. Measure the Overall Fabric Width
Using a tape measure, take a measurement 20-30cm below the widest part of your boat on the Port side gunnel and across to 20-30cm below the opposite Starboard gunnel ensuring that the measurement goes over the highest part of the boat, windscreen, Bimini, rocket launcher (whichever of these is applicable).

Once you have these 2 overall measurements refer to the below table showing the overall cover dimensions for each size of cover offered and match up to arrive at the best fit for your boat.